manualshive.com logo in svg

Lenovo x3650 M5, Installation And Service Manual

The Lenovo x3650 M5 is an exceptional product designed for high-performance computing. To help you fully grasp its functionality and features, we provide a comprehensive Product Manual for free download on our website. Explore the vast possibilities of this remarkable device by accessing the manual at 88.208.23.73:8080.

Share
Download
background image

SD adapter

SD 2

SD 1

3

4

1

1

Figure 214. SD adapter removal

Step 7.

If you are instructed to return the SD adapter, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.

Replacing the SD adapter

Use this information to replace a SD adapter.

Important:

If your SD adapter option comes with VMware vSphere ESXi software preloaded, you must make

configuration changes to your system UEFI

before

installing the SD adapter in your compute node. See the

documentation that comes with the SD adapter and “Using the Setup Utility” on page 52 for information
and instructions.

To install the SD adapter, complete the following steps:

Step 1.

Read the safety information that begins on “Safety” on page v and “Installation guidelines” on
page 297.

Step 2.

Turn off the server, and disconnect all power cords and external cables.

Step 3.

Remove the top cover (see “Removing the top cover” on page 149).

Step 4.

Remove the riser-card assembly 2 (See “Removing a riser-card assembly” on page 186).

Step 5.

Insert the SD cards.

Step 6.

Align the SD adapter with the alignment pin and the connector; then, lower the SD adapter and
push it until it is firmly seated.

Step 7.

Fasten two screws.

260

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for x3650 M5

Panasonic KX-NS1000 Quick Reference Manual preview
KX-NS1000
Brand: Panasonic Pages: 28
F5 ARX-2500 Installation Manual preview
ARX-2500
Brand: F5 Pages: 2
F5 WANJet 400 Appliance Upgrade Instructions preview
WANJet 400 Appliance
Brand: F5 Pages: 11
Far south networks Com.X1 PBX Getting Started preview
Com.X1 PBX
Brand: Far south networks Pages: 4
Gateway ALR 7300 Maintaining And Troubleshooting preview
ALR 7300
Brand: Gateway Pages: 138
IBM Flex System p270 Compute Node Installation And Service Manual preview
Flex System p270 Compute Node
Brand: IBM Pages: 510
Ovislink AirLive WP-203G User Manual preview
AirLive WP-203G
Brand: Ovislink Pages: 132
TYAN Transport TX46 (B4985) Service Service Manual preview
Transport TX46 (B4985) Service
Brand: TYAN Pages: 75
IBM RS/6000 7043 260 Service Manual preview
RS/6000 7043 260
Brand: IBM Pages: 322
Blackberry Enterprise Server 33 Reference Manual preview
Enterprise Server 33
Brand: Blackberry Pages: 207
Quatech 4-Port USB 2.0 Device Server over IP... Specifications preview
4-Port USB 2.0 Device Server over IP...
Brand: Quatech Pages: 2
Intel SC450NX - Server Platform - 0 MB RAM Product Manual preview
SC450NX - Server Platform - 0 MB RAM
Brand: Intel Pages: 200
Supermicro SuperServer 1019D-FRN8TP User Manual preview
SuperServer 1019D-FRN8TP
Brand: Supermicro Pages: 126
Cisco Aironet 1500 Series Datasheet preview
Aironet 1500 Series
Brand: Cisco Pages: 8
Cisco 7835-H2 - Media Convergence Server Datasheet preview
7835-H2 - Media Convergence Server
Brand: Cisco Pages: 8
Cisco APP1000 - One Application Server Appliance Installation And Administration Manual preview
APP1000 - One Application Server Appliance
Brand: Cisco Pages: 20
Cisco APIC L3 Installation And Service Manual preview
APIC L3
Brand: Cisco Pages: 130
HP Windows Server 2008 R2 Administrator'S Manual preview
Windows Server 2008 R2
Brand: HP Pages: 18

Brands by name

Popular brands

Load more brands