Lenovo x3650 M5 Installation And Service Manual Download

Page: 306 / 1340

000

00000

Figure 267. System board removal

Step 18. If you are instructed to return the system board, follow all packaging instructions, and use any

packaging materials for shipping that are supplied to you.

Attention:

Make sure to place the socket covers for the microprocessor sockets on the system

board before returning the system board.

Replacing the system board

Use this information to replace the system board.

Notes:

1. When you reassemble the components in the server, be sure to route all cables carefully so that they are

not exposed to excessive pressure.

2. When you replace the system board, you must either update the server with the latest firmware or

restore the pre-existing firmware from a diskette or CD image. Make sure that you have the latest
firmware or a copy of the pre-existing firmware before you proceed. See “Updating the firmware” on
page 49, “Updating the Universal Unique Identifier (UUID)” on page 63, and “Updating the DMI/SMBIOS
data” on page 65 for more information.

3. When you replace the system board, make sure that you remove the Integrated Management Module

Advanced Upgrade and place it on the new system board. For information about the Advanced
Upgrade, see “Using the remote presence and blue-screen capture features” on page 59.

4. Reactivate any Features on Demand features. Instructions for automating the activation of features and

installing activation keys is in the

Features on Demand User's Guide

. To download the document, go to

https://fod.lenovo.com/lkms, log in, and click

Help

Important:

Some cluster solutions require specific code levels or coordinated code updates. If the device

is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before
you update the code.

294

Lenovo System x3650 M5 Installation and Service Guide

Summary of Contents for x3650 M5





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands

Lenovo x3650 M5, Installation And Service Manual

Search results

Summary of Contents for x3650 M5

Reviews:

Related manuals for x3650 M5

Brands by name

Popular brands