background image

28

Lenovo YOGA 720-12IKB 

Hardware Maintenance Manual

Keyboard function keys

You can access certain system settings quickly by pressing the appropriate 

function keys.

Table 3. Fn key combinations

Fn + B:

Activates the break function.

Fn + P: 

Activates the pause function.

Fn + C: 

Enables/disables the scroll lock.

Fn + S: 

Activates the system request.

Fn +  : 

Activates the Pgup key function.  

Fn +  : 

Activates the Pgdn key function. 

Fn +  : 

Activates the home key function. 

Fn +  : 

 Activates the end key function.  

Fn + Space: 

(on select models)

Adjusts the keyboard backlight (off 

 dim 

 bright 

 off).

Table 4. Hotkeys 

 :

Mutes/unmutes the sound.

 :

Decreases the volume level.

 :

Increases the volume level.

 :

Enables/disables the microphone.

 :

Refreshes the desktop or the currently active window.

 :

Enables/disables the touchpad.

 :

Enables/disables Airplane mode.

 :

Enables/disables the integrated camera.

 :

Locks the screen.

 :

Toggles the display between the computer and an external 

device.

 :

Decreases display brightness.

 :

Increases display brightness.

Note:

 You can use the Lenovo Setting to enable/disable the hotkey function.

Summary of Contents for YOGA 720-12IKB













































































Reviews: