-18-
Safety Instructions:
When using electrical equipment, basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons, including the following:
1. Read and follow all instructions before using the equipment.
2. Keep the cord out of heavy traffic area. To avoid fire hazard NEVER put the cord under the rugs, near heat generating
devices.
3. Always turn off the equipment before servicing.
4. Do not drop or insert any object into any openings.
5. Do not operate any equipment with a damage parts.
6. Any other use not recommended by the manufacturer may electrical shock or injury to persons.
7. Never use outdoors
8. Do not attempt to repair or adjust any electrical or mechanical functions on the unit.
Features:
1. Dual powerful massage jet-streams
2. Jet assembly can be attached from the pump for
quick cleaning and sanitizing.
3. Thermally Protected
4. AC motor (long life)
5. Extremely low power consumption .
Cleaning Instruction:
1. Turn the unit off and wait until the motor is fully stops.
2. Remove the front jet cover and notice the locking screw in the center
3. Remove the locking center screw (Indicated an Arrow) and pull out impeller from housing.
4. Use Anti-Bacterial solution (EPA Registered) to clean all part/s.
5. After sanitization, place impeller onto the motor shaft and fasten with center locking screw ( Opposite arrow)
Ultra Pipeless Jet Whirlpool Motor Specifications:
Model: CS-0216A-MT
Rating: 120VAC / 60Hz, 0.4A - thermally Protected
Pump: Dual whirlpool Jet Flow
Mounting: Single 3.5” hole Diameter
Auto tighten Mounting screws(4)
Ultra Jet Whirlpool Motor
TOP
TOP
Close Jet Cover
1. Align an arrow line
2.Turn to right (Top indicated)
Safety Instructions:
When using electrical equipment, Basic safety precautions must be followed to reduce the
risk of fire, electrical shock, and injury to Persons.
1. Read and follow all instructions before using the equipment.
2. Keep electrical cord out of heavy traffic area. To avoid fire hazard NEVER place electrical cord under the rug, near heat
Generating devices.
3. Always turn power off the equipment before service.
4. Do not drop or insert any object into any openings.
5. Do not operate any equipment with damaged parts.
6. Any other use not recommended by the manufacturer may cause electrical shock or cause injury to person/s.
7. Never use it outdoors
8. Do not attempt to repair or adjust any electrical or mechanical.
MAGNA JET Features:
1. Hydro dual massage jet stream
2. Magnetic whirlpool jet cover can be remove for
quick cleaning and sanitizing.
3. Built-In electronic sensor for pump control.
4. AC Whirlpool motor (long life)
5. Very low power consumption (27W)
6. Manufactured in USA.
Cleaning Instruction:
1. Turn off the unit and wait until the motor is fully stops.
2. Hold hydro whirlpool jet cover firmly and pull to separate from the round magnetic field.
3. Turn hydro whirlpool jet cover to left to open and pull out impeller.
4. Use Anti - Bacterial solution (EPA Registered) to clean all parts.
5. After sanitize all parts, place impeller and close hydro whirlpool jet cover to turn right to lock
6. Hold firmly the whirlpool cover jet and gently place it onto the round magnetic field. Do not release the hydro whirlpool jet
cover until jet cover is on the round magnetic housing.
MAGNA-JET Specifications:
Model:MAGNA-JET-120 VAC, 60HZ, 1.0Amp
Pump: Hydro-Massage Dual Air Jet Flow
Mounting: Single 3.5” Hole Diameter Auto Tighten Mounting Screws(4)
Motor
Round Magnetic Field (housing)
Magnetic
Jet Base
Magnetic
Impeller
Magnetic
Whirlpool Jet Cover
Magna-Jet (Optional)
OPTIONAL
MOT
OR
ST
ANDARD MOT
OR
