background image

IB-PH559(9803C)-WM-E-042602

LOCATION OF CONTROLS

  1. COMFORTABLE ROUNDED HANDSET - for comfortable use even during long calls.

  2. HANDSET VOLUME CONTROL - adjusts the volume of handset receiver.

  3. DIAL BUTTON - dials the number currently displayed.

  4. OPTION BUTTON - used for dialing the correct number of digits (7-digits, 10-digits or 11-digits).

  5. DELETE BUTTON - erases an individual record or all records from the Caller ID Memory, also used to

accept time, date, and area code during initial setup.

  6. NEW CALL INDICATOR - flashes when new calls have come in.

  7. CALLER ID DISPLAY - shows the caller’s name, number, and calling time & date (and more).

  8. UP/DOWN BUTTONS - reviews 

all

 calls received.

  9. ONE-TOUCH SPEED DIAL BUTTONS - allows you to store numbers and quickly dial them from memory.

10. SPEAKERPHONE VOLUME CONTROL - adjusts the volume of the speaker.

11. STORE (MEMORY) BUTTON - used for storing numbers into the one-touch or two-touch Speed Dial memories.

12. AUTO (MEMORY) BUTTON - allows you to store & dial numbers from 10 two-touch memory locations.

13. MUTE BUTTON - allows you to hear the other party without them hearing you (while pressed).

14. SPEAKERPHONE - allows you to make or receive a call without lifting the handset.

15. SPEAKERPHONE MICROPHONE - for speakerphone use.

4

15

18

17

16

24

21

19

16. REDIAL/PAUSE BUTTON - get a new dial tone, then press this

button to dial the last dialed number (also if you need a pause for PABX).

17. FLASH BUTTON - press to switch calls for call waiting or to get

a new dial tone.

18. TONE/PULSE SWITCH - selects the desired dialing mode.

19. RINGER ON/OFF SWITCH - normally on, allows you to turn the

ringer off for undisturbed privacy.

20. AC ADAPTOR JACK - allows you to use home AC power supply

(AC adaptor not included).

4 5

1

3

6

7

8

11

14

13

10

2

12

9

25

26

BACK OF THE PHONE

22

23

21. LINE CORD JACK - insert one end of the telephone line cord here when connecting the telephone.

22. HOOK SWITCH - press down to release the line, hold it down and then release it to get a new dial tone

or for call waiting.

23. HANDSET CLIP - holds the Handset in place when the telephone is mounted on a wall.

24. COILED CORD JACK - Insert COILED CORD from HANDSET here.

25. BATTERY COMPARTMENT - place 4 size “AA” alkaline batteries inside according to the polarities as

shown on the bottom of the phone.

26. RESET SWITCH - to reset your phone by inserting a pin into the small hole on the bottom of the phone.

20

IB-PH559(9803C)-WM-E-042602.p65

4/26/02, 4:30 PM

6

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for PH-559





















Reviews: