INSTRUCTIONS:
Power Button
1. Place the Milk Frother on a flat, level surface.
Insert the whisk firmly onto the shaft at the base of the jug.
2.
Pour the milk into the jug according to the max & min mark inside the jug.
See the max capacity chart is below for your reference.
3.
Place the lid firmly onto the jug.
4.
Insert the power plug into the machine properly.
5.
Press and hold on the Power Button on the control panel for 2 seconds to turn the
unit on.
6.
If the power button is not pressed again within 4 seconds, the default mode of
Frothing dense foam & Heating will begin.
7.
To change the mode, short press the power button repeatedly to change between
the different frothing modes.
8.
When your chosen mode has an illuminated blinking indicator light on it, the light
