Lenoxx CD-105 Operating Instructions Manual Download

Page: 18 / 20

IB-CD105(SY)-DG-E-041602

MAINTENANCE

Cleaning the Lens

If the lens becomes dirty, it may cause a

skipping of sound during CD operation.

Clean with a commercially available lens

cleaner and blower.

Cleaning the Tape Heads

Wipe the heads, the pinch roller and

the capstan with a cleaning swab slightly

moistened with cleaning fluid or alcohol

after every 10 hours of operation for

optimum playback and recording quality.

After cleaning, insert a tape when the

areas cleaned are completely dry.

Cleaning the Cabinet

Clean the cabinet, panel and controls

with a soft cloth slightly moistened with

a mild detergent solution. Do not use

any type of abrasive pad, scouring

powder, or solvent, such as alcohol or

benzene.

RECORD/PLAY BACK HEAD

PINCH ROLLER

CAPSTAN

COTTON SWAB

ERASE HEAD

Notes for Storing

Cassette Tapes

1. Do not put a tape near a magnetic

field, such as a TV, or speaker.

Magnetic fields may reduce the tape

sensitivity or even erase the

recording.

2. Do not store tape for any length of

time in a hot, moist or dusty place.

NOTE:

In order to see and clean the

head, you may have to press

PLAY first.

IB-CD105(SY)-DG-E-041602.p65

4/26/02, 4:04 PM

Summary of Contents for CD-105





















Search results

Summary of Contents for CD-105

Reviews:

Related manuals for CD-105

Brands by name

Popular brands

Lenoxx CD-105, Operating Instructions Manual

Search results

Summary of Contents for CD-105

Reviews:

Related manuals for CD-105

Brands by name

Popular brands