Lenoxx CD-105 Operating Instructions Manual Download

Page: 19 / 20

IB-CD105(SY)-DG-E-041602

TROUBLE SHOOTING

Problem

Remedy

The power is not on.

There is no sound.

appears in the display

even when a CD is in place.

Insert the CD with the label side up.

CD does not play.

Make sure that the CD compartment is

closed.

Place the CD with the label side up.

Clean the CD.

Take out the CD and leave the CD DOOR

open for about an hour to dry moisture

condensation.

Make sure the FUNCTION switch is at CD

position.

Clean the CD, or replace it if the CD is

badly damaged.

Place the player in a location free from

vibration.

Check if your batteries are fresh.

The sound is weak or has

poor quality.

Replace all the batteries with new ones if

they are weak, or bring the set near a

window, or rotate the set.

The RECORD button does

not function/The tape does

not play.

Make sure the safety tab on the cassette

is in place.

Make sure the FUNCTION switch is at TAPE

position.

The tape does not erase

completely.

Clean the erasing head (see page 17).

Replace all the batteries with new ones if

they are weak.

The tape does not record.

Make sure the tape is inserted properly.

Make sure the safety tab of the cassette

is in place.

The sound is weak/The

sound quality is poor.

Clean the heads, pinch roller and capstan

(see page 17).

General

CD player

Radio

The sound drops out.

Tape player

Cassette PLAY button pops

up.

The tape has reached its end. Remove it,

flip to the other side and re-insert.

Connect the AC power cord to a wall

outlet securely.

Make sure the batteries are inserted

correctly and they are fresh.

Make sure the FUNCTION switch is at the

right position as you want.

Adjust the volume.

Unplug the headphones when listening

through speakers.

IB-CD105(SY)-DG-E-041602.p65

4/26/02, 4:04 PM

Summary of Contents for CD-105





















Search results

Summary of Contents for CD-105

Reviews:

Related manuals for CD-105

Brands by name

Popular brands

Lenoxx CD-105, Operating Instructions Manual

Search results

Summary of Contents for CD-105

Reviews:

Related manuals for CD-105

Brands by name

Popular brands