8
Phono
note:
-
Remove the stylus protector.
-
Be sure that the tone arm is detached from the tone arm rest before
operating and re-secured again afterwards.
1. Press Phono button (23)
2. Set the speed selector (32) to the proper position depending on the record to be
played.
3. Place the record on the platter (use the spindle adaptor (31) if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will
begin to rotate.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the record and
return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark
: On some records, the auto-stop area was out of the unit setting, so it will stop before the last
track finishes. In this case, select the Auto-stop switch (33)
to “ off “ position, then it will run to the end of
the record but will not stop automatically (turn off the unit by using the power button or switch back the
auto-stop switch (33) to
“ on “ position to stop the platter rotating). Then put the tone arm back to the rest
position.
Playing compact disc
⚫
Getting started
1. Press CD button (10).
2. Press CD tray open/close button (26) to open the CD tray.
3. Place a CD with the printed side facing up inside the tray.
4. Press the Disc skip button (22) to turning the CD tray and loading out the other disc compartment.
5. Press the CD tray open/close button (26) to close the CD door.
6. CD search is performing, the display will show the total number of discs, number of tracks & playing
time of disc.
Note
: CD searching will be performed every time when switching to CD mode or closing the CD door. All
CD functions will respond only after the CD searching is complete (around 5 seconds).
⚫
Play / pause mode
1. Pre
ss the “Play/Pause” button (21) to start playback, the first track of the first disc will be played and
the play indicator will appear on the LCD display (2).
2. Or press Disc skip button (22), to select the desire tray disc.
3.
To interrupt, press the “Play/Pause” button (21) once, and the display will start flashing. Press again to
release & resume playback.
⚫
Stop mode
1.
If Stop button (8) is pressed during play or pause mode, system will go to stop mode.
⚫
Skip mode (skip up
/ skip down
)
1. During play or pause mode, if Skip up button (27) is pressed it will go to next track and display the
track no. and then remain the play or pause mode.
2. During play or pause mode, if Skip Down button (12) is pressed. It will go back to the beginning of the
track; original track no. is display and remain the play or pause mode.
3. After step 2, press skip down button (12) again will go to the previous track and remain the play or
pause mode.
⚫
Search mode (search up
/ search down
)
1. During play mode, if search up button (27) is pressed & hold for few seconds, it will start searching
forward.
2. During play mode, if search down button (12) is pressed & hold for few seconds. It will star searching
backwards.
