background image

IB-CDR1902(AD)-WM-E-062802

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

 

1. Read these instructions.

 2. Keep these instructions.

 3. Heed all warnings.

 4. Follow all instructions.

 5. Do not use this apparatus near water.

 6. Clean only with dry cloth.

 7. Do not block any ventilation openings, install in accordance with the manufacturer’s instructions.

 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightening storms or when unused for long periods of time.

1

WARNING

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is intended

to alert the user to the presence

of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of

sufficient magnitude to

constitute a risk of electric

shock to persons.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE

RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR

BACK).  NO USER SERVICEABLE

PARTS INSIDE.  REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an
equilateral  triangle is intended
to  alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally or has been dropped.

15. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid

such as vases shall be placed on the apparatus.

Summary of Contents for CDR-1902


















Reviews: