REMOTE CONTROL PREPARATION
Remove the BATTERY COMPARTMENT DOOR of the REMOTE
CONTROL and insert 2 size AAA alkaline batteries (included)
according to the + and - markings inside the BATTERY
COMPARTMENT of the REMOTE CONTROL unit.
Tips on Battery Use
Reversing polarities will damage the batteries and possibly your
REMOTE. Be sure to follow polarity ( + and -) as indicated.
Do not mix different types together (Alkaline, Carbon-Zinc,
Nickel-Cadmium etc.), or old batteries with new ones.
When not in use for an extended period of time (over 60 days)
remove the batteries to prevent possible acid leakage or
corrosion resulting in damage to your remote.
When the batteries have become discharged, they must be
disposed of in a safe manner that complies with all applicable
laws
.
Installation of batteries should only be done by an adult
(for safety).
Battery Installation
Remote Control Operation Range
Point the REMOTE CONTROL unit from less than 20 feet from
the remote control sensor and within about 60
0
of the front of the
DVD player (not your TV set).
Tips on REMOTE CONTROL operation
The operating distance may vary according to the brightness of
the room.
Do not point bright lights at the remote control sensor.
Do not place objects between the remote control unit and the
remote control sensor.
Do not use this remote control unit while simultaneously
operating the remote control unit of any other equipment.
! !
REMOTE SENSOR RANGE
within 20 feet
®
Remember to point the
REMOTE CONTROL in the
direction of the DVD player,
not the TV.
Point the REMOTE CONTROL in the
Right Direction
When you want the remote to operate the DVD player, point the
remote at the DVD player, not the TV. The Remote has to be
pointed in the correct direction and toward the correct component
(DVD player) in order for the remote controls signal to
communicate with the remote sensor on the DVD player. Make
sure there is a clear path between the remote control and the DVD
player so the signal is not blocked.
11
IB-DVD-2002-WC-ZR-E-V1
