OPERATION:
TO MAKE A BAG
1. Open the upper cover of the appliance, pull the bag of the required length from the bag storage
slot, close the cover and lock it tightly.
Note
: Place the curled face downwards, keep the bag straight and close the cover and lock
it.
2. Slide the cutter from one end to another to cut a piece of bag, then touch the SEAL button and
it will start to flash, the progress indicator light will start to light up two by two and the
appliance starts sealing. When the progress indicator lights are all ON, the SEAL button will
stop flashing. The sealing progress is completed with a “beep beep” sound. You can also cut
the bag after sealing. Unlock the cover and open the appliance. Take out the vacuum bag that
with one end sealed.
Note: the heating element of the appliance will automatically stop 20 seconds to cool down
between two sealing operation.
Please allow the appliance to cool for 10 minutes after sealing 10 times.
