4
TIP:
After you've consumed your blended beverage, wash out the blender bottle and reuse it
throughout the day for water or other liquids.
Note: For optimal performance, place desired ingredients in the blender bottle according to the
following order: Liquids, fresh ingredients, frozen fruit, yogurt and ice cream.
Blending Tips
• Put liquids in the cup first, unless a recipe says otherwise.
• Cut all firm fruits and vegetables into pieces no larger than 3/4 inch (1.8 cm) to 1 inch (2.5 cm).
• Don't overload sport bottle. If the motor stalls, turn the blender off immediately, unplug the unit
and let it cool for at least 15 minutes. Then, remove a portion of the food and continue.
• This blender could not be used to mash potatoes, whip egg whites or substitute dairy toppings, mix
stiff dough or grind raw meat.
Cleaning and Storing Your Blender
IMPORTANT: UNPLUG BEFORE CLEANING. DO NOT IMMERSE THE BLENDER BASE IN WATER OR
ANY OTHER LIQUID.
Use a damp, soft sponge with mild detergent to clean the outside of the blender base. All parts
except the blender base are dishwasher-safe. You can also wash the parts, except the blender
base, in warm, soapy water. Rinse well and dry.
Storing Your Blender
After cleaning, reassemble blade assembly to open end of the sport bottle and then place in the
blender base. Snap the drinking lid on the other end of the sport bottle.
Working Time
The blender works 1 minute and stops 1 minute for 5 cycles, then let the motor cool down for at
least 15 minutes.
To remove the assembled bottle from the motor
base, turn it anti-clockwise and pull away from the
motor base.
Turn the assembled bottle upside down so the blade
assembly is facing up.
Replace the blasé assembly with the spill proof
drinking lid. You are now ready to take your blended
drink to go!
