Before use:
Attach the exit support to the sheet exit. This will aid in keeping the sheet straight and level as it
comes out of the laminator.
Operate the machine on a flat and stable surface.
Ensure there is enough clear space at the rear of the machine for the laminated pouch to exit the
machine.
PRODUCT STRUCTURE:
1. Ready Indicator
2. Power Indicator
3. Power Switch
4. Pouch Entry
5. Jam Release Lever
4
2
OPERATION:
1.
Insert the power plug into an electrical socket.
2.
WƵƚƚŚĞƉŽǁĞƌƐǁŝƚĐŚ༅ŝŶƚŽƚŚĞKEƉŽƐŝƚŝŽŶ͘dŚĞƉŽǁĞƌŝŶĚŝĐĂƚŽƌ༄ǁŝůůŝůůƵŵŝŶĂƚĞĂŶĚƚŚĞ
motor will start up.
3.
Wait 3-5 minutes for the laminator to warm up. Once it reaches the proper temperature, the ready
ŝŶĚŝĐĂƚŽƌ༃ǁŝůůŝůůƵŵŝŶĂƚĞ͘
4.
Put the item being laminated into a laminating pouch leaving a 3-5 mm border from the sealed
end of the pouch.
5.
Insert them together ŝŶƚŽƚŚĞ ƉŽƵĐŚ ĞŶƚƌLJ ༆ ŽĨ ƚŚĞ ůĂŵŝŶĂƚŽƌ ƐĞĂůĞĚ ĞŶĚ ĨŝƌƐƚ͘ dŚĞLJ ǁŝůů ďĞ
laminated automatically.
6.
/ĨƉŽƵĐŚŝƐĂĐĐŝĚĞŶƚĂůůLJũĂŵŵĞĚ͕ƵƐĞƚŚĞũĂŵƌĞůĞĂƐĞůĞǀĞƌ༇ĂŶĚƉƵůůŽƵƚƚŚĞƉŽƵĐŚŵĂŶƵĂůůLJ͘
LAMINATING TIPS:
1. In order to avoid crispation, do not insert the open side of the pouch into the entrance first and the
pouch can’t be scissored apart before use. Moreover, please follow the guide-lines in front of the
entrance when inserting to make sure that your pouch is inserted vertically to the entrance.
2. Different types of paper products may not seal evenly or appear cloudy. If this happens, re-insert
the pouch into the laminator for better effect.
3. When the machine is not laminating, it is recommended that you turn the unit off.
4. When the pouch slides out of the exit after being laminated, it may be very hot and easy to lose
shape. Please be careful not to injure your hand, nor damage the pouch by over exerting.
5
1
3
