14
Update LZ100 / LZV100 and LH100 to Version 3.6
2.9.2
Fast changing of a CV value
If you have selected a CV or entered and confirmed a value with
'Enter' during programming in operational mode, you can increase or
decrease this value simply with '+' or '-'. The new value will be entered
immediately into the decoder.
This is particularly helpful if you, for example, want to adjust the
brightness of the locomotive lighting.
If you have selected a CV and entered a value, you can increase or
decrease this value with '+' or '-'. The new value will be entered
immediately after each change (unlike when programming on the
programming track).
Keep pressing '+' or '-‘ to increase or decrease the value.
2.9.3
Reading CVs with the address display LRC120
It is now possible to read CV values via PoM while in operation.
Requirements:
•
Use of a RailCom-able locomotive decoder (GOLD series).
•
The locomotive is located in a track section monitored by the
address display LRC120.
•
RailCom transmission is activated in the decoder.
Information on how to connect the address display LRC120 and the
settings of RailCom-able locomotive decoders can be found in the
respective operating manuals.
Proceed as follows:
1
3
8
Enter the address of the locomotive
whose features you want to change
via PoM.
Move the locomotive whose CVs you want to read via PoM to the
track section monitored by the address display LRC120. The address
display now shows the address of the locomotive.
The menu that was selected
last is displayed
.
The programming mode that
was selected last is displayed.