Safety information
821XKlimaBA0399
2-1
2 Safety information
2.1 General safety information
Safety and application notes for controllers
(to: Low-Voltage Directive 73/23/EEC)
1. General
During operation, drive controllers may have, according to their type of protection, live, bare, in some cases also
movable or rotating parts as well as hot surfaces.
Non-authorized removal of the required cover, inappropriate use, incorrect installation or operation, creates the risk of
severe injury to persons or damage to material assets.
Further information can be obtained from the documentation.
All operations concerning transport, installation, and commissioning as well as maintenance must be carried out by
qualified, skilled personnel (IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN VDE 0110 and
national regulations for the prevention of accidents must be observed).
According to this basic safety information qualified skilled personnel are persons who are familiar with the erection,
assembly, commissioning, and operation of the product and who have the qualifications necessary for their occupation.
2. Application as directed
Drive controllers are components which are designed for installation in electrical systems or machinery.
When installing in machines, commissioning of the drive controllers (i.e. the starting of operation as directed) is
prohibited until it is proven that the machine corresponds to the regulations of the EC Directive 89/392/EEC
(Machinery Directive); EN 60204 must be observed.
Commissioning (i.e. starting of operation as directed) is only allowed when there is compliance with the EMC Directive
(89/336/EEC).
The drive controllers meet the requirements of the Low Voltage Directive 73/23/EEC. The harmonized standards of the
prEN 50178/ DIN VDE 0160 series together with EN 60439-1/DIN VDE 0660 part 500 and EN 60146/DIN VDE 0558
are applicable to drive controllers.
The technical data and information on the connection conditions must be obtained from the nameplate and the
documentation and must be observed in all cases.
3. Transport, storage
Notes on transport, storage and appropriate handling must be observed.
Climatic conditions must be observed according to prEN 50178.
4. Erection
The devices must be erected and cooled according to the regulations of the corresponding documentation.
The drive controllers must be protected from inappropriate loads. Particularly during transport and handling,
components must not be bent and/or isolating distances must not be changed. Touching of electronic components and
contacts must be avoided.
Drive controllers contain electrostatically sensitive components which can easily be damaged by inappropriate
handling. Electrical components must not be damaged or destroyed mechanically (health risks are possible!).
5. Electrical connection
When working on live drive controllers, the valid national regulations for the prevention of accidents (e.g. VBG 4) must
be observed.
The electrical installation must be carried out according to the appropriate regulations (e.g. cable cross-sections, fuses,
PE connection). More detailed information is included in the documentation.
Notes concerning the installation in compliance with EMC - such as screening, grounding, arrangement of filters and
laying of cables - are included in the documentation of the drive controllers. These notes must also be observed in all
Show/Hide Bookmarks
Summary of Contents for 8210 HVAC Series
