Firmware
≤
11.00 - DMS 8.0 EN - 10/2011
L
277
8400 StateLine C | Reference manual
I/O terminals
Analog terminals
6.2.1.1
Signal adaptation by means of characteristic
This function extension is only available from version 04.00.00!
An individual characteristic according to the illustration below can be parameterised for
the analog input via the subcodes of
C00010
to provide different slopes and a dead band.
In this case the input signal corresponds to the X axis and the output signal corresponds to
the Y axis:
[6-4]
Characteristic for analog inputs
In the »Engineer«, there is a parameterising dialog for entering the characteristic. This
dialog also displays the set characteristic graphically.
199.99 %
y
max
-y
max
-x
max
x
max
y
min
-y
min
199.99 %
-199.99 %
-199.99 %
Parameter
Info
Lenze setting
Value Unit
C00010/1
n
AIN1: (+y0) = min
0.00 %
C00010/2
o
AIN1: (+x0) = Dead band
0.00 %
C00010/3
p
AIN1: (-y0) = (-min)
0.00 %
C00010/4
q
AIN1: (-x0) = (-Dead band)
0.00 %
C00010/5
r
AIN1: (+ymax)
199.99 %
C00010/6
s
AIN1: (+xmax)
199.99 %
C00010/7
t
AIN1: (-ymax)
199.99 %
C00010/8
u
AIN1: (-xmax)
199.99 %
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
