8400 StateLine C | Reference manual
Parameter reference
Parameter list | C00750
642
L
Firmware
≤
11.00 - DMS 8.0 EN - 10/2011
C00750
C00751
C00753
C00760
Parameter | Name:
C00750 | Select. of BU oscillos. channels
Data type: UNSIGNED_8
Index: 23825
d
= 5D11
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00751 | Oscilloscope data memory
Data type: UNSIGNED_32
Index: 23824
d
= 5D10
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00753 | Oscilloscope data memory octet string
Data type: OCTET_STRING
Index: 23822
d
= 5D0E
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00760 | LA_SwitchPos: Analog connection list
Data type: UNSIGNED_16
Index: 23815
d
= 5D07
h
Connection parameters for "Switch-off positioning" application: 16-bi inputs
• Selection of the 16 bit output signals to be connected to the 16 bit input signals
• The selection list contains all 16 bit output signals which can be assigned to the 16 bit inputs displayed by the
subcodes.
Selection list
See
selection list - analog signals
Subcodes
Lenze setting
Info
C00760/1
0: Not connected
LA_SwitchPos
: wCANDriveControl
(input for control word from CAN to device control)
C00760/2
0: Not connected
LA_SwitchPos
: wMCIDriveControl
(input for control word from communication interface to
device control)
C00760/3
0: Not connected
LA_SwitchPos
: nVoltageAdd_a
(input for additive voltage impression)
C00760/4
0: Not connected
LA_SwitchPos
: nBoost_a
(input for additional setpoint for the motor voltage at
speed = 0)
C00760/5
0: Not connected
LA_SwitchPos
: nPWMAngleOffset
(input for additional offset for the electrical angle of
rotation)
C00760/6
0: Not connected
LA_SwitchPos
: nTorqueMotLim_a
(input for maximum torque in motor mode)
C00760/7
0: Not connected
LA_SwitchPos
: nTorqueGenLim_a
(input for maximum torque in generator mode)
C00760/8
0: Not connected
LA_SwitchPos
: nMainSetValue_a
(input for main speed setpoint)
C00760/9
0: Not connected
LA_SwitchPos
: nAuxSetValue_a
(input for additional speed setpoint)
C00760/10
0: Not connected
LA_SwitchPos
: nGPAnalogSwitchIn1_a
(input for analog-value selector analog signal 1)
C00760/11
0: Not connected
LA_SwitchPos
: nGPAnalogSwitchIn2_a
(input for analog-value selector analog signal 2)
C00760/12
0: Not connected
LA_SwitchPos
: nGPArithmetikIn1_a
(input for arithmetic function analog signal 1)
C00760/13
0: Not connected
LA_SwitchPos
: nGPArithmetikIn2_a
(input for arithmetic function analog signal 2)
C00760/14
0: Not connected
LA_SwitchPos
: nGPMulDivIn_a
(input for analog signal for multiplication/division)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
