Firmware
≤
11.00 - DMS 8.0 EN - 10/2011
L
731
8400 StateLine C | Reference manual
Working with the FB Editor
User interface
"Application interconnection" level
This level displays the interconnection of the application selected in
C00005
in detail. All
function blocks used in the application and the system blocks which provide the interfaces
to the drive and motor interface and to the MotionControlKernel (MCK) are displayed with
their connections.
The interconnection of the I/Os of the controller with the inputs and outputs of the
application is masked out in this level.
[15-6] Schematic diagram of "Application interconnection"
Tip!
Every application block features so-called "free inputs and outputs" which you can
use to transfer signals from the I/O level to the application level and vice versa.
• In the Lenze setting, these connectors are hidden in the function block editor.
• These connections can be shown via the
Connector visibilities
command in the
Context menu
of the application block.
Note!
With the "StateLine" version, the interconnection shown in the application level
cannot be edited.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
