Template: Dipsticks for G50BS166
[mm]
100
50
10
0
M1, M6
M3
M4
M2
M5
How to check the lubricant level:
1
.
Remove the control screw at the marked position.
2
.
Insert the dipstick through the threaded hole. Observe the position of the dipstick in the
template!
3
.
Carefully pull out the dipstick and determine the lubricant level. The lubricant level must
be within the marked range of the dipstick.
4
.
If the lubricant level is too low, top up lubricant until the lubricant level is in the marked
area of the dipstick. If the loss is greater, determine the cause.
5
.
Insert the control screw and tighten it to the specified torque.
Maintenance
Maintenance work
49
