Standard settings
Parameter
Value
Comment
Designation
Delivery
Setting range
Parameter set name
[Text]
File name of the parameter set without file
extension *.lsm
Output speed 1
0
-212.2 ... -42.6 rpm
0 rpm
42.6 ... 212.2 rpm
CCW rotation = < 0 rpm
STOP = 0 rpm
CW rotation = > 0 rpm
Lenze Smart motor with gearbox: The ratio i
is taken into account in the calculation of the
output speed.
Output speed 2
127.6 rpm
Output speed 3
0
Output speed 4
0
Output speed 5
0
Acceleration time
depending on the
order
[0.0 ... 20.0] s
Acceleration time t1 of the ramp generator
from 0 rpm to nmax [2600/i] rpm
Deceleration time
Deceleration time t2 of the ramp generator
from nmax [2600/i] rpm to 0 rpm
Energy-saving function
[Off]
Optimised for:
•
High dynamic performance
•
Maximum starting torque and torque
•
High speed accuracy
[On]
Reduced energy absorption in partial load
operational range.
Approx. 50 % of the maximum starting tor-
que are available.
Diagnostics
Parameter
Value
Comment
Designation
Delivery
Setting range
Peak load of the drive
---
[0 … 250] %
Last peak value of the medium thermal load
(maximum value in the last mains switching
cycle)
From firmwar version 03.00
Peak load of the brake resis-
tor
---
[0 … 250] %
Last peak value of the medium thermal load
(maximum value in the last mains switching
cycle)
From firmwar version 03.00
Meters
Parameter
Value
Comment
Designation
Delivery
Setting range
Elapsed-hour meter
---
[0 ... 596523] h
Total time of "Motor rotating"
Operating‐hour meter
---
[0 ... 596523] h
Total time of "mains ON"
Device data
Parameter
Value
Comment
Designation
Delivery
Setting range
Material number
depending on the
order
[number]
Drive identification
Device types
[Text]
Firmware version
[Text]
Hardware Version
[Text]
Motor
[Text]
Gearbox
[Text]
Ratio
[number]
Brake
[Text]
Serial number
[Text]
Commissioning
68
