Different brands of detergent dissolve
in different times. Some detergent tab-
lets do not have the best cleaning re-
sults during short washing pro-
grammes. Use long washing pro-
grammes when you use the detergent
tablets to fully remove the detergent.
Use of rinse aid
Rinse aid makes it possible to dry the
dishes without streaks and stains.
The rinse aid dispenser automatically
adds rinse aid during the last rinsing
phase.
Do these steps to fill the rinse aid dispens-
er:
1. To open the rinse aid dispenser, turn
the cap
4
counterclockwise
2. Fill the rinse aid dispenser
6
with rinse
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam during the washing programme.
4. To close the rinse aid dispenser, put
the cap in position and turn it clock-
wise.
Fill the rinse aid dispenser when the in-
dicator
5
becomes clear.
Adjust the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
7
to increase or
decrease the dosage.
Using combi detergent tablets
These tablets contain agents as detergent,
rinse aid and dishwasher salt. Some types
of tablets can contain other agents.
When you use tablets, that contain salt and
rinse aid, do not fill the salt container and
rinse aid dispenser.
Be sure that these tablets are applicable for
the water hardness in your area (refer to the
instructions on the packaging of the prod-
ucts).
1. Adjust the water hardness to the lowest
level. Refer to 'Setting the water soften-
er'.
2. Set the rinse aid dosage to the lowest
position. Refer to 'Use of detergent and
rinse aid'.
Using again separately detergent, salt
and rinse aid
1. Fill the salt container and the rinse aid
dispenser.
2. Adjust the water hardness to the highest
level.
3. Start a washing programme without
dishes.
4. When the washing programme is com-
pleted, adjust the water softener to the
water hardness in your area.
5. Adjust the quantity of rinse aid.
LOADING CUTLERY AND DISHES
Hints and tips
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove the remaining food from the
items.
• Make soft the remaining burned food on
the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that water does not collect in
containers or in bowls.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to pre-
vent them to bond together.
• When you put the items in the baskets,
make sure that the water can touch all
surfaces.
• Put light items in the upper basket. Make
sure that the items do not move.
• Water droplets can collect on plastic
items and non-stick pans.
leonard
23
Summary of Contents for LI1310
Page 59: ...leonard 59 ...
Page 60: ...156954780 A 152011 ...
