- 3 -
●
Before connecting the communication interface signal cable, turn off the UPS and disconnect
the UPS from AC power source.
●
DO NOT
clean the UPS with benzene, thinner or any solvent, use only soft cloth to clean the UPS
after it has been turned off.
●
Turn on the UPS before turn on all connected loads to prevent surge damage.
●
During a heavy rain storm, avoid using electrical appliances including the UPS to prevent
damage from lightning strike.
1.4 Battery Safety
Warning:
Even the UPS is disconnected from AC power source, the UPS OUTPUT outlets
may have hazardous voltage because of battery may continue supply power.
Warning:
DO NOT
dispose of battery in a fire. They may be exploded.
Caution:
DO NOT
disassemble battery. They contains poisonous electrolyte which is
harmful
to
your
skin
and
eyes.
Caution:
For battery replacement, replace battery with the same type and rating as
originally
installed
battery.
Caution:
The UPS contains sealed lead acid battery and must be recycled properly. For
recycling, please return it to ypur local distributor or service center or contact
your local recycling center for proper disposal information.
Caution:
When the UPS has not been used for a long period of time or UPS is stored for an
extended period of time, battery should be fully recharged every three months
by plugging the UPS with the AC power source. Then, turn on the UPS and let
the UPS charge battery for 6 hours.
●
When replacing a battery, use tools with insulated handles and remove any watch, rings or
other metal objects that you wear in order to avoid electric shock.
- 4 -
INTRODUCTION
2.1 General
BLUE series is an uninterruptible power supply for office automation equipment (computers
and peripherals such as monitors, modem, printers, fax machines, etc). Its major function is to
eliminate any power problems such as a blackout, brown out, sag, surge, spike, etc. that might
cause malfunctions of the connected loads. It also provide automatic voltage regulator (AVR), surge
suppressor and backup power system.
The BLUE series UPS can be started when there is no utility power to supply power the connected
loads in an emergency. It display the electrical status and operating status on LCD display and on
computer's monitor via UPS monitoring software.
FRONT AND REAR PANEL
3.1 Front panel
