- 34 -
If you have to store UPS for a long period of time, before storing, be sure the battery is
fully charged and it need to be recharge every three months to preserve the condition of
the Internal battery;
11.1
Plug the UPS power cord into an electrical outlet.
11.2
The indicator lights no. 2 blink at once.
11.3
Leave the UPS connected to the electrical outlet for at least 8 hours.
11.4
Double click the switch for self-testing and see the result of the self-test (more
details under section 6.2.3 and 6.3.4)
12.1
Turn off the computer and UPS. Then connect USB cable to computer and UPS.
12.2
Turn on the UPS and computer. Insert the Easy-Mon X Software CD into CD-ROM
drive.
12.3
LEONICS presentation will show on the computer monitor. Press ESC button to
exit the Presentation and close the window, then the Easy-Mon CD window will
show on screen.
STORAGE AND PRESERVATION
SOFTWARE INSTALLATION
- 35 -
12.4
Click the "Easy-Mon X Install for USB only" button, and then select "How to install
USB Driver" to read the instructions for installing USB driver.
12.5
Follow the instruction on screen to install UPS driver.
12.6
When installation is completed, restart computer.
12.7
Install Easy-Mon X Package by select the operating system of your computer.
12.8
Follow the instruction on screen.
12.9
When Easy-Mon X installation is completed, Restart the computer
1.2.10 Open the "Easy-Mon X Setup" program and click the "Detect" button to search
for UPS and communication
port automatically.
1.2.11 Select the name that shown in the "UPS Communication Device Name" area,
then set other parameter as required. Finally, click "Save" to end this program
12.12 Open the "Easy-Mon X Spy" program to monitor power data.
Note : -
The values of input (Vin) and output (Vout) voltages read from the Easy-
Mon X Software from many UPSs in the same network may be different,
even though connected to the same power source. Possible causes of
these happenings are the voltage over each branch circuit is not equal,
or
±
1% accuracy of input and output voltage measuring circuit, or the
UPSs are connected to different power phases of the same source.
-
You can find more information about Easy-Mon X in the Easy-Mon X
Software CD.
********************************
Summary of Contents for Ulta Series
Page 1: ......
