background image

2.3 Features

Advanced LEONICS Microprocessor control: 

 A specially programmed

microprocessor produced only for LEONICS is used as  the CPU for the UPS.

This makes the ULTRA Series UPS perform faster and more accurately to

protect valuable equipment and its peripherals and provides advanced

control features.

Power Watcher: 

 Full time load power monitoring and battery charge

warnings are provided to make sure that your UPS will be able to properly

backup power to the PC protected by UPS.  "Power Watcher" helps users

know in real time that they are not overloading their UPS. With this useful

feature you can increase loads as much as you want until the UPS  overload

warning is shown.  (LEONICS suggests that for highest  reliability and safety

that you should connect loads at no more than 75 % of rated UPS power.

This allows for loads that change power level during use and provides for

some reserve backup power for some loads.)

Battery Watcher (Battery Replacement Indicator): 

 Every time ULTRA

Series UPS performs a self-test and when the battery has been fully

charged, it will perform a battery condition evaluation to determine

whether the battery used by the ULTRA Series UPS is still good or should

be replaced.  The battery replacement indicator will show when the

battery should be replaced.

Ultra Fast Charger: 

 This UPS features an advanced, 3 stage charger (Bulk -

Boost - Float) to shorten charging time without harming the battery.

Besides fast charging, UPS also maintains the proper charging voltage to

preserve the battery from self-discharge and to make sure that it is always

fully charged and ready to provide backup power to your PC.

Intelligent Battery Management (IBM):  

The intelligent battery

management system will manage charging and discharging to get

longer backup times and prolong battery life.

Advanced Load Outlet Management (ALOM): 

  This feature allows the

user to preset operation of the "Intelligent Channel" via Easy-Mon X

Software.  The user can preset the intelligent output channel to cut  off

power to low priority loads when the UPS is overloaded, over temperature

or has a low battery (available on 1050 VA or higher model only).

- 8 -

Hot Swappable Battery: 

  The user can replace the battery even when the

UPS is running and without turning off the computer as long as mains

power is available.

Surge Protection for Telephone Line: 

  Surge protection protects

equipment data from surges that come from telephone line (RJ11).

Surge Protection for LAN Line (option): 

  Surge protection protects

equipment data from surges that come from LAN line.  These special

sockets can accept either telephone plugs (RJ11) or LAN plugs (RJ45).

Perfect LED Display (depend on model): 

 Attractive outlook with full

function LED display.  It shows load level, input voltage level, battery level,

battery replacement condition and overload condition.

Perfect LCD Display (depend on model): 

 Attractive outlook with full

function LCD  display.  It shows load level, input voltage level, battery level,

battery replacement condition and overload condition.

Easy Display (depend on model): 

 Simple outlook with easy function

display.  It shows utility line status, battery status and load status.

Multi-function switch :  

Single switch with 4 functions, very convenient to users :

1. Turn on / Turn off UPS

2. Mute audible alarm

3. Self-test switch

4. Switch display mode (For the UPS with LED display only.)

Extend Backup Time (option): 

 It extends the battery unit to increase the

duration of UPS  backup time. It can protect data with extra effectiveness.

Inverter temperature sensor (option): 

 When the UPS is operating under backup

mode, the inverter temperature sensor will check the temperature inside inverter and

warning when the temperature is too high.  You should reduce the  load immediately.

Automatic voltage regulator -37% to +30%. buck and double boost (option) :

With it’s especially wide range automatic input voltage regulator,  from –37% to +30%,

UPS can lessen backup mode transferred transaction, which helps you save the

battery‘s energy for emergencies, it also prolongs your battery life.  (This optional is

special for specific models, please see your features on the side of the carton).

- 9 -

Summary of Contents for Ulta Series




















Reviews: