- 7 -
Assembly
NOTE:
Make certain that the dust
filter
is always inserted before
using the appliance.
1. To open the dust collector
, turn the
dust collector
clockwise and pull it
off the motor unit
.
Make certain that the dust filter
is
inserted and put the dust collector
back on. Turn the dust collector
anti-clockwise until the arrow symbol
points to the dot
on the motor
unit
.
2. If the nozzle attachment
is requi-
red, insert this into the suction
opening on the dust collector
.
Operation
1. Remove the hand vacuum cleaner
from the charging station
. Using
the supplied plugs and screws
the
charging station can optionally be
mounted on the wall.
2. To switch the appliance on, move the
on/off switch
to the position "I".
3. After use place the on/off switch
into position “O“.
4. The nozzle attachment
is used to
clean narrow, hard-to-reach areas.
Put the assembled hand vacuum clea-
ner in the charging station
and
start the charging process when the
vacuum power is noticeably weaker.
Cleaning
Changing and cleaning the dust filter
To achieve the best results, empty the
dust collector
and clean the dust
filter
after every use.
1. To open the dust collector
, turn the
dust collector
clockwise and pull it
off the motor unit
.
2. To remove the dust filter
from the
motor unit, turn it clockwise and pull
it off the motor unit
.
3. Empty the dust collector
.
4. Clean the dust filter
in cold water
and wait until it is completely dry be-
fore putting it back on the motor unit
.
5. Place the dust filter
on the motor
unit
. Turn the dust filter
anti-
clockwise to attach it. Never use the
hand vacuum cleaner without the
dust filter
inserted.
6. Put the dust collector
back on.
Turn the dust collector
anti-clok-
kwise until the arrow symbol points
to the dot
on the motor unit
.
Important!
The suction opening
must always be open and unblocked.
Blockages lead to overheating and
damage to the motor.
KH4420
KH4420_VacuumCleaner_IB_UK 18.04.2007 10:31 Uhr Seite 7
