Lervia LERVIA KH 1150, Operating Instructions Manual

11

2 Hang the fan in the installation plate, making sure that the

mount lines up properly with the notch (see Fig.: circle). 

3 Electrical connection 

Colour coding: 

Green-yellow (

I

): PE conductor 

Blue (

II

): Neutral 

conductor 

Brown (

III

): 

Current-carrying wire (also: black) 

Connect the electrical wires

Step 1: Connect the PE conductor to the lamp-wire 

connector (

I

).

Step 2: Connect the blue wire (N) (

II

).

Step 3: Connect the brown wire (L) (

III

). 

Connect the cable plug

Connect the cable plugs of the two PE conductors of the 

fan with the sockets on the installation plate. 

Then connect the wide cable plug of fan to the socket on 

the installation plate.

4 Snap the casing (A) onto the installation plate: insert it into 

the two adjacent bearings and snap it into the opposing

spring-loaded bearing (click!). 

5 Insert the halogen bulbs into the lamp: place the bulbs 

into the round grooves with light pressure, then turn 

clockwise until tight. 

6 Switch on the power supply. 

DANGER

: The electrical connection may only

be performed by a qualified electrician! 

Failure to follow these instructions presents a life-
threatening risk of electric shock!!

( I )

(II)

(III)

1

2

3

“KLICK”

A

NOTE: 

Avoid touching the halogen bulbs with

your fingers. Use a clean cloth or cloth gloves when

inserting the bulbs 

IB_KH1150_E2731_UK_V1.qxd  15.01.2007  14:47 Uhr  Seite 11