Lervia LERVIA KH 1150, Operating Instructions Manual

12

7 Operation

7.1 Setting the Speed  

Set the speed level with the pull chain (G) on the motor

housing. Each pull changes the speed in the following

sequence: 

Fast - medium - slow - OFF 

Switch the light on with the middle pull chain (F).

If the fan is also switched on and off with a switch or a 

circuit breaker, it will start at the last speed set, unless it 

was switched off using the pull chain.  

7.2 Setting the Direction

INFO: 

Direction

The fan turns counterclockwise:

Classic fan function. The downward air flow creates a 

cooling effect. Typically used during warm times of the year.

The fan turns clockwise:

The air flow is directed toward the ceiling. The heated 

room air is distributed better throughout the room and the

accumulation of warm air near the ceiling is prevented.

CAUTION: 

Only operate the direction switch while

the fan is stopped to prevent damage to the fan motor. 

Change the direction with the sliding switch. 

Switch positions:  

Up: The fan turns clockwise.   

Down: The fan turns counterclockwise.

(as viewed from below)

8 Cleaning 

DANGER

: Disconnect the fan from the mains

network before cleaning it: switch off the corresponding

building fuse or circuit breaker. Touching cables or

components under power presents a life-threatening risk!

Wipe the fan off with a soft cloth, which may be slightly

moistened for stubborn dirt. Do not use any solvents,

abrasive cleansers or sharp objects, e.g. rough sponges or

brushes, to avoid scratching the fan.  

IB_KH1150_E2731_UK_V1.qxd  15.01.2007  14:47 Uhr  Seite 12