background image

One of the first considerations will be where to place the speaker for the best all-around effect. Most musi-

cians prefer having the Leslie speaker near the organ or keyboard product so that the sound is balanced to 

their desired level. Closer or more distant locations are easily accommodated by adjusting the volume level 

of the speaker (see page 4 Leslie Setup Procedure).   

 

 

 

 

 

 

Care of your new Leslie Speaker

Your new Leslie speaker has been carefully engineered for durability and maximum service. Except for 

occasional replacement of maintenance items such as belt and vacuum tubes, your new Leslie speaker will 

require little or no attention.

CAUTION

As with any electrical or electronic equipment, care should be exercised to prevent fire and shock hazard. 

The following information is provided to give guidance in the safe use and care of your Leslie Speaker.

ENVIRONMENT

This speaker is primarily designed to be used in an interior environment. To prevent an electrical shock 

hazard, do not expose your Leslie to wet floors, liquid spills and splashes, or rain.

ENCLOSURE

The removal of any part of the enclosure may result in exposure to electrical shock. Servicing should not be 

attempted by the user; refer all servicing to factory-trained technicians. 

POWER

Operate this speaker only at the AC voltage and frequency indicated on the nameplate located on the back of 

the Leslie.

CLEANING THE CABINET

Use a soft cloth or chamois, slightly dampened with water. A little mild detergent may be added to the water 

if necessary. For the Leslie models finished in red walnut, rub lightly with the grain of the wood. Excessive 

rubbing in one spot or at the edge of the cabinet may damage the finish. Use a good grade of furniture wax 

or polish.

Where to place your new Leslie Speaker System

OWNERS MANUAL     Models 122A, 122XB, 147A

5

Whatever the distance from the keyboard, the 

Leslie speaker should be given enough space so 

the sound can radiate fully through the room. 

Restricting the sound dispersal by placing the 

cabinet against a wall or between large pieces 

of furniture reduces the effectiveness of the 

speaker. Sound reflection is desirable. Yet in 

most homes, much sound is absorbed by 

furniture, rugs and drapes, rather than being 

reflected. The Leslie speaker overcomes this 

absorption problem by providing a moving-

sound source. Placing the speaker diagonally in 

a corner is a good practice. Sound will be reflected off the two adjacent walls, enhancing the beauty, power 

and dispersion of the music.

Summary of Contents for 122A









Reviews: