17
1. Park the machine on a level surface and remove the key.
2. Lift the sewage tank to expose the battery compartment
3. Carefully install the battery in the battery compartment brake and connect the battery cable to
the front of the machine as shown below
Note: Do not throw the battery into the battery compartment to avoid damage to the battery and
the machine.
4. Before connecting the battery, please make sure the electrode and the terminal are clean. Use
electrode cleaning solution and wire brush as needed.
Note: Apply a thin layer of metal-free lubricant or protective spray to the attached wiring to avoid
battery corrosion.
5. After the battery is installed, check the battery scale of the battery gauge. Charge the battery as
needed.
Machine cleaning method
Cleaning method:
Manually control the water valve to adjust the amount of water that the cleaning fluid (water and
detergent) flows to the ground. The brush cleans the floor with a solution of detergent and water.
While the machine is moving forward, use the squeegee to draw the sewage from the floor into the
recovery tank.
Brush and scouring pad information
To ensure optimum performance, use the correct brush type for cleaning. The recommended
brushes and scouring pads are as follows:
Soft nylon brush (white) -
It is recommended to clean the coated floor without hurting the floor. Clean without leaving
scratches.
Summary of Contents for SJ860
Page 1: ...1 SJ860 Driving floor scrubber User s manual ...
Page 7: ...7 ...