13
USER MANUAL
SEttiNgS
All the setting that were set in the Setup wizard can later be changed
at the Settings.
5 Settings
Basic gateway settings are the same as in the Setup wizard.
Here you can set how the gateway will connect to your home
network. you can chose between two options:
LAN MODE
(static
or DHcP) and
WLAN MODE
(connected to your home
WLAN
or
as access point).
if the value for
LAN MODE
is DHcP (as default) the Letrika
communication gateway gains
IP, MASK, GATEWAY
, and
DNS
by itself. All the settings under
LAN MODE
can also be set
manually.
the default
CONNECTED IP
for
WLAN MODE
is 192.168.50.1. if
the user insert the
CONNECTED IP
for
WLAN MODE
into the
URL bar of his preferred web browser the Letrika communication
gateway web application should appear. if the
CONNECTED IP
for
WLAN MODE
is changed, it can be found at the LcD screen of the
gateway (the same is true for
CONNECTED IP
for
LAN MODE
).
when you are done with changes at any of the settings click on
the
SAVE
button. you will be informed
if the settings were saved
successfully at the top of the page.
Basic plant settings are the same as in the registration wizard.
Each new micro inverter should be registered via this page.
5.1 gateway settings
5.3 Network settings
5.2 Plant settings
Figure 16: Network settings