8
USER MANUAL
choose the name for your power station and enter it into the
field
PLANT NAME
.
if you would like to activate username/password protection,
mark the field
SECURITY
and enter username and password.
you can later easily change your password at the same page.
For additional settings mark the field
ADVANCED SETTINGS
.
• TIMEZONE:
if Letrika communication gateway is not
connected to the internet, manually choose the timezone in
which Letrika communication gateway is located from the
dropdown menu.
• HARVEST MEASUREMENT INTERVAL:
From the dropdown
menu choose how often the current power measurement
and the current energy measurement will be updated.
Default value is 1 minute.
• HARVEST STATUS INTERVAL:
From the dropdown menu
choose how often the power station's status will be
checked. Default value is 1 minute.
• EXPORT TYPE:
if you would like to export your power
station's measurements choose the export service provider
from the dropdown menu. currently supported export
service providers are Sitel and MoiDoM.
if you decide to export your measurements to Sitel, enter
www.pomse.si into the
EXPORT HOST
field and fill the
EXPORT URL
field. otherwise, if you choose
MOIDOM
,
fill the fields
EXPORT HOST
,
EXPORT URL
and
EXPORT
MOIDOM ID
with values that were assigned to you by
First access to the web application will automatically start
the setup wizard which consists of two steps that you have to
follow.
3 Setup wizard
3.1 gateway settings
SEtUP wizARD
Figure 6: choosing the name for your power station
Figure 7: Activating username/password protection
Figure 8: Advance Letrika communication gateway settings