LEUCHTTURM DM 5, Operating Instructions Manual

LCD Digital Microscope DM 5

 – Operating instructions – Page 11

Exposure measurement  

Select the exposure measurement methods so that a correctly exposed video can be generated.  
Available for selection:
• 

Middle   : Area around the middle of the image section is used for measurement.

• 

Multi   : Several fields in the image section are used for measurement.

• 

Point   : A very small area in the middle of the image section is used for measurement.

NOTE: The exposure value can also be set outside the menu using the 

►

  and 

◄

  buttons  

(see “Overview of button functions”, page 5).

Menu – Video settings

Press the menu button (M) in Video mode to enter the video settings menu.  
The following values can be set here: 

Movie size (resolution), exposure measurements,  

white balance, display e

ff

ects and date stamp.

White balance  

Select settings for white balance based on the 
prevailing light conditions. Select from 

Auto  

(automatic balance), 

Daylight, Cloudy, Neon light 

or 

Incandescent lamp.

Movie size  

Select the video size (resolution). Select from  
640, HD and FHD (Full-HD).

Display e

ff

ect  

Various e

ff

ects/filters are available for video. 

Choose between 

Normal, Black-White, Sepia, 

Negative, Red, Green and Blue.

Date stamp  

A date and/or time stamp can be added to every video. Choose between 

Date or Date/Time.  

Select 

OFF if no stamp is required. To set the date and the time, see “Menu – General settings”,  

section “Date and time”, page 12.