Safety instructions
10
RS4/AS-i
Leuze electronic
DEUTSCH
E
NGLISH
FRANÇAIS
IT
A
LIANO
ESPAÑOL
N
EDERLANDS
3
Safety instructions
3.1
General safety instructions
Achtung!
The RS4/AS-i with an integrated AS-i Interface is designed exclusively for connection to the
AS-Interface Safety at Work, and is not to be used in connection with other applications.
The RS4/AS-i can only be connected to the machine controls by way of the AS-Interface
and the AS-i safety monitor.
Achtung!
A condition of appropriate use of the RS4/AS-i is that personnel should be familiar with the
Connecting and Operating Instructions for the RS4-4 and the RS4/AS-i.
For putting the RS4/AS-i into operation with the AS-Interface, familiarity with the Connec-
ting and Operating Instructions for the AS-i safety monitor and the User Manual for the
configuration and diagnosis software of the AS-i safety monitor is also required (asimon –
Configuration and Diagnostics Software).
Note:
Please have regard to the safety instructions and instructions for appropriate use of the
equipment in chapter 3 of the Connecting and Operating Instructions for the RS4-4.
Warning: laser beam!
The RS4 laser scanner is a laser device of laser class 1. Please have regard to the
applicable statutory and local regulations for the operation of laser systems. Avoid
positioning the scanner at eye level.
3.2
Appropriate use
Achtung!
It cannot be guaranteed that operating personnel and equipment will be protected if the
device is not used in accordance with the defined mode of operation.
Achtung!
Any tampering with or modification of equipment (except in ways that are expressly
described in the present Manual) is forbidden.