Fast commissioning / operating principle
Leuze electronic
MA 258
i
19
TNT
35/7-2
4
V
Setting the parameters on the MA via the EDS file
After the EDS file has been integrated, the device must be created as a "module" to establish
a connection. It is also helpful to assign an IP address to the MA beforehand, e.g. via the
service interface.
To do this, double-click on the tree node EtherNet.
In the new window, select the desired device from the database and carry out the respec-
tive configuration.
Figure 3.6:
Creating a module
First set the IP address.
