Starting up the device
Leuze electronic GmbH + Co. KG
MLC 530 SPG
77
9.4
Teaching of fixed blanking areas
Objects for "fixed blanking" cannot change their position during the teach event. The object must have a
minimum size corresponding to the physical resolution of the ESPE. Teaching is done in the following
steps:
• Initiating by actuating and releasing the teach key switch
• Accepting by actuating and releasing the teach key switch after 60 s or less.
A new teach event deletes the previously taught state. If the “Fixed blanking” function is to be deselected,
this can be done by teaching a free protective field.
1
2
3
4
1
Initial situation
2
Bring objects into the protective field
3
Start and end teaching – press and release key switch twice
4
Operation – objects may only move by one beam with respect to the taught position
Fig. 9.1:
Teaching of fixed blanking areas
