2.4.1 Address Mapping
The Address Mapping function allows IP addresses used in a private Local Area Network (LAN)
to be mapped (translated) to different Public IP Addresses used in the public/global Internet. This
feature limits the number of Public IP addresses required from the ISP and also maintains the
privacy and security of the Local Area Network. Essentially the Broadband router allows one or
more Public IP Address(es) to be mapped to a pool of local Private IP Address(es). You can set
which WAN ports a virtual IP range can use to access the Internet. The virtual IP range will use
the public IP of the WAN port in using when access Internet.
Parameter
Description
WAN ports
You can assign WAN ports that each virtual IP
range can use to access the Internet. T
he Public/legal
IP addresses of WAN ports that exist in the Internet that
will be transformed to one or more private/
Virtual IP
address (LAN PC clients) e.g. 192.168.2.x. This means
that the private IP addess(es) selected will use the public
IP addresses of designated WAN ports when accessing
the Internet
Note:
You need to give your LAN PC clients a
fixed/static IP address for Address Mapping to work
properly.
Click <
Apply>
at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
42
Summary of Contents for FBR-1406TX
Page 1: ...LevelOne FBR 1406TX 2 PORT BROADBAND ROUTER W 4 LAN Port User s Manual Version 1 0 1...
Page 41: ...Click on one of the three NAT selections and proceed to the manual s relevant sub section 41...
Page 49: ...Click on one of the firewall selections and proceed to the manual s relevant sub section 49...
Page 58: ...58...
