background image

 

74

 

GNU GENERAL PUBLIC LICENSE 

 

Terms And Conditions For Copying, Distribution And Modification 

 

0. This License applies to any program or other work which contains a notice placed by the copyright holder 

saying it may be distributed under the terms of this General Public License. The "Program", below, refers to 

any such program or work, and a "work based on the Program" means either the Program or any derivative 

work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or 

with modifications and/or translated into another language. (Hereinafter, translation is included without 

limitation in the term "modification".) Each licensee is addressed as "you".   

Activities other than copying, distribution and modification are not covered by this License; they are outside 

its scope. The act of running the Program is not restricted, and the output from the Program is covered only if 

its contents constitute a work based on the Program (independent of having been made by running the 

Program). Whether that is true depends on what the Program does.   

1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any 

medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright 

notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of 

any warranty; and give any other recipients of the Program a copy of this License along with the Program.   

You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty 

protection in exchange for a fee.   

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the 

Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided 

that you also meet all of these conditions:   

a) You must cause the modified files to carry prominent notices stating that you changed the files and the 

date of any change.   

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from 

the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of 

this License.   

c) If the modified program normally reads commands interactively when run, you must cause it, when started 

running for such interactive use in the most ordinary way, to print or display an announcement including an 

appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a 

warranty) and that users may redistribute the program under these conditions, and telling the user how to 

view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an 

announcement, your work based on the Program is not required to print an announcement.)   

These requirements apply to the modified work as a whole. If identifiable sections of that work are not 

derived from the Program, and can be reasonably considered independent and separate works in 

themselves, then this License, and its terms, do not apply to those sections when you distribute them as 

Summary of Contents for FCS-1101


















































































Reviews: