server will not accept name containing blank spaces, period (.), or names
with only
Next, you must configure your LevelOne FNS-6000 to the workgroup. The workgrou
represents a basic computer group within the Microsoft Network. Files
are normally shared within the group. Workgroups can accommodate as much as
15 characters but must exclude the following characters:
; : " < > * + = \ | ? , [ ] /
The first character cannot be a period (.). For ease of management and usage, please se
your LevelOne FNS-6000 and attached computer(s) in the same workgroup.
Moreover, the LevelOne FNS-6000 allows you to specify
comments (such as
administrator name, department, or location) that describe the LevelOne FNS-6000 for
•
Date & Time
Set the date, time, and time zone according to your location. If the settings are incorrectly
entered, the following problems may occur:
1. When using a web browser to access or save a file, the time of the file accessed o
saved may be out of sync.
2. The system event log time will be incorrect compared to the actual time an action
occurred.
•
Language Setting
The server is based on the language settings and uses it accordingly while creating or
displaying files and directories.
Select the correct language settings
to avoid the following problems:
1. Inability to create files or directories with special characters
2. Inability to display files or directories name with special characters
Network Settings
The network settings include the TCP/IP configuration for WAN and LAN, network service
settings, router and firewall configuration, etc.
•
WAN Configuration
According to your WAN connection, you can choose the following four
methods to configure the TCP/IP settings to the external network:
1.
Use PPPoE Protocol
PPPoE is commonly used in DSL-based broadband services to establish the Internet
connection. Please check with you ISP to check if PPPoE is used. You will also need
the user name and password information that supplied by your ISP
to properly configure the PPPoE settings.
18
