Telnet
All TCP/IP networks
Telnet can be used only to monitor the
printers attached to the LevelOne
Printer Server.
WebAdmin
Windows NT Server
(TCP/IP)
Web Browser
WebAdmin is installed on the NT
Server, and then accessed using a Web
Browser.
WPConfig
Windows 3.1
(IPX/SPX)
Not all LevelOne Printer Server
features are available.
Using the Windows Setup Wizard
1.
Insert the supplied CD-ROM into your drive. If the setup program does not start
automatically, run
Autorun.exe
in the root folder.
2.
On the first screen, shown below, click
Setup Wizard
.
1.
Click
Next
on the first screen, to view a list of Print Servers on your LAN.
2.
Select your new Print Server, then click
Next
to continue.
3.
Enter the required data on the
Print Server
screen.
•
Name can be changed if you wish.
•
Comment is optional.
•
Select or enter the Workgroup name for this Print Server.
•
You can enter a name (eg. Printer Model) for each Printer.
4.
Click
Next
to configure the
TCP/IP
screen.
•
Select
Obtain IP Address automatically
if your LAN has a DHCP Server, otherwise
select
Fixed IP Address
.
•
For
Fixed IP Address
, enter an unused address from the range used on your LAN, or
click the
Suggest New Values
Button.
•
Use the same Network Mask and Gateway as PCs on your LAN.
5.
Click
Next
to continue to the final screen.
6.
Click
Finish
to save the data to the Print Server.
Print Server configuration is now complete.
•
Windows and Macintosh client PCs can now be configured to use the Print Server.
•
If using NetWare or Unix, further configuration is required. Refer to the appropriate
chapter for details.
- 9 -
