Level One Printer Servers
Figure 30: Add Port (Peer-to-peer Print Driver)
If your LevelOne Printer Server is not listed:
•
Select "List all Print Servers", and click the "Refresh" button.
•
Check that both the LevelOne Printer Server and the printer are properly
connected, and powered on.
•
Make sure the LevelOne Printer Server has been configured.
•
If using TCP/IP, try installing the NetBEUI protocol. Then uninstall and re-
install the
Peer-to-peer Print Driver
.
6.
Select the desired printer port, and then click the "Next" button. A pop-up message will
inform you if the port has been created successfully.
If you see the following error message, you need to install
Internet Explorer 4 or later.
7.
Then a screen like the following will be displayed:
- 58 -