7
3.
Connecting to the Network
This chapter provides the installation procedure.
3.1. Pre-Installation Requirements
Before to start hardware installation, make sure the installation environment has
following items:
PCs with 10/100Base-TX Ethernet cards:
The PC must have a standard Ethernet interface to connect with the
Device.
UTP/STP cable with RJ-45 connector:
Check the cable and connectors work properly.
Fiber cable with SC/LC connector:
Check the cable and connector types are correct.
Power outlet:
100 to 240V AC at 50 to 60 Hz power. Make sure that the Device power is
accessible and cables can be connected easily.
Dedicated power supply:
Use dedicated power circuits or power conditioners to supply reliable
electrical power to the network devices.
A dry cool place:
Keep the device away from moisture. Avoid direct sunlight, heat source,
and high amount of electromagnetic interference around.
Mounting tools:
If user intends to mount the device on a rack, make sure have all the tools,
such as mounting brackets and screws.
