86
The QoS module is mainly for traffic control and priority configuration, including two submenus:
DiffServ
, and
Bandwidth Control
.
9.1 DiffServ
This switch classifies the ingress packets, maps the packets to different priority queues and then
forwards the packets according to specified scheduling algorithms to implement QoS function.
This switch implements three priority modes based on port, on 802.1P and on DSCP, and supports
four queue scheduling algorithms. The port priorities are labeled as CoS0, CoS1… CoS7.
The DiffServ function can be implemented on
Port Priority
,
Schedule Mode
,
802.1P Priority
and
DSCP Priority
pages.
9.1.1 Port Priority
On this page you can configure the port priority.
Choose the menu
QoS
→DiffServ→Port Priority
to load the following page.
Figure 9-6 Port Priority Config
The following entries are displayed on this screen:
Port Priority Config
Select:
Select the desired port to configure its priority. It is multi-optional.
Port:
Displays the physical port number of the switch.
Priority:
Specify the priority for the port.
LAG:
Displays the LAG number which the port belongs to.
Configuration Procedure:
Step Operation
Description
1
Select the port priority
Required. On
QoS
→DiffServ→Port Priority
page,
configure the port priority.
