90
9.2 Bandwidth Control
Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to
ensure network in working order, can be implemented on
Rate Limit
and
Storm Control
pages.
9.2.1 Rate Limit
Rate limit functions to control the ingress/egress traffic rate on each port via configuring the
available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed
and utilized.
Choose the menu
QoS
→Bandwidth Control→Rate Limit
to load the following page.
Figure 9-10 Rate Limit
The following entries are displayed on this screen:
Rate Limit Config
Port Select:
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select:
Select the desired port for Rate configuration. It is multi-optional.
Port:
Displays the port number of the switch.
Ingress Rate (bps):
Configure the bandwidth for receiving packets on the port. You can
select a rate from the dropdown list or select "Manual" to set
Ingress rate, the system will automatically select integral multiple
of 64Kbps that closest to the rate you entered as the real Ingress
rate.
