60
User Authentication
You can change login user name and password for the management security issue
1.
User name:
Key in the new user name (The default is ‘root’)
2.
Password:
Key in the new password (The default is ‘root’)
3.
Confirm password:
Re-type the new password
4. And then, click
Apply
User Authentication interface
Port Statistics
The following information provides the current port statistic information.
Port:
The port number.
Type:
Displays the current speed of connection to the port.
Link:
The status of linking—‘
Up
’ or ‘
Down
’.
State:
It’s set by Port Control. When the state is disabled, the port will not transmit
or receive any packet.
Tx Good Packet:
The counts of transmitting good packets via this port.
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less
than 64 bytes], oversize, CRC Align errors, fragments and jabbers packets) via this
port.
Rx Good Packet:
The counts of receiving good packets via this port.
Rx Bad Packet:
The counts of receiving bad packets (including undersize [less than
64 bytes], oversize, CRC error, fragments and jabbers) via this port.
Tx Abort Packet:
The aborted packet while transmitting.
Packet Collision:
The counts of collision packet.
Packet Dropped:
The counts of dropped packet.
Summary of Contents for GSW-0891
