A. Mirror Mode
In terms of Mirror Mode, it uses two NIC cards to operate. One is for data capturing, and the other is
for system management. The following diagram shows the concept of how this mode is operated. The
NIC card (labelled Number 1) with port “eth0” is connected to the top HUB/Switch to capture the data.
The NIC card (labelled Number 2) with port “eth1” for management (system web/telnet access) can
be connected to the HUB or Switch.
This section illustrates the way of how to set up the Mirror Mode with the following diagrams step by
step:
Step 1: Management Port Setup
1. Select and tick the option “MANAGE”
2. Select the NIC card called “eth0”.
3. Setup the information of IP, Mask IP, Broadcast IP and Gateway IP. Please check with your
network Administrators if you are not sure the IP setting.
4. Click on the button [Transfer] to submit.
Summary of Contents for ICI-1000
