1.
Lazy Mode:
This device support the Lazy Mode to automatically learn the MAC
address of WDS peers
, you don’t have to input other peer AP's MAC address.
However, not all the APs can be set to enable the Lazy mode simultaneously; at
least there must be one AP with all th
e WDS peers’ MAC address filled.
2.
Green AP:
Enable the Green AP function to reduce the power consumption when
there is no wireless traffic.
3.
AP Number:
This device supports up to 8 SSIDs at the same time for you to
manage your wireless networks. You can select AP1 ~ AP8 and configure each
wireless network individually.
4.
Network ID (SSID):
Network ID is used for identifying a Wireless LAN. Client
stations can roam freely over this device and other Access Points that have the
same Network ID. The factory default
SSID is “default”, you can change it to a
meaningful identifier for the wireless users to easy find it out.
5.
SSID Broadcast:
By default, the SSID Broadcast setting is “Enable”, and the
device will broadcast beacons that have some information, including SSID, to the
air, so that wireless clients can know how many AP devices by scanning the
