Levenhuk LabZZ D1, User Manual

2

џ

Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized 
service center. Do not touch the optical surfaces with your fingers. To clean the device exterior, use only special cleaning wipes and special 
optics cleaning tools from Levenhuk. Do not use any corrosive or acetone-based fluids to clean the optics. 

џ

Protect  the  device  from  sudden  impact  and  excessive  mechanical  force.  Do  not  apply  excessive  pressure  when  adjusting  focus.  Do  not 
overtighten the locking screws. Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open 
fire and other sources of high temperatures. If you are not using the device for extended periods of time, store the objective lenses and 
eyepieces separately from it. Be careful during your observations, always replace the dust cover after you are finished with observations to 
protect the device from dust and stains. Do not use the device for lengthy periods of time, or leave it unattended in direct sunlight. Keep the 
device away from water and high humidity. The kit includes everything needed for assembly, but if you need some additional tool you can use a 
basic set of standard instruments that almost everyone keeps at home.

Seek medical advice immediately if a small part or a battery is swallowed.

1. Remove the telescope and accessories from the package.
2. Loosen the eyepiece screws and install the eyepiece into the holder (in the focuser). Secure it by tightening the eyepiece 
screws. Do not overtighten them!

Telescope assembly

Telescope magnification depends on the focal length. To find out a telescope's magnification, divide the focal length of the 
telescope by the focal length of the eyepiece. For example:

Telescope magnification

Magnification

 = 

Telescope focal length

Eyepiece focal length

= 

300

mm

6

mm

= 50х 

All

Levenhuk

telescopes

, 

microscopes

, 

binoculars

and

other

optical

products

, 

except

for accessories, carry a 

lifetime warranty

 against defects in 

materials  and  workmanship.  Lifetime  warranty  is  a  guarantee  on  the  lifetime  of  the  product  on  the  market. All  Levenhuk  accessories  are 
warranted to be free of defects in materials and workmanship for 

six months

 from date of retail purchase. Levenhuk will repair or replace such 

product or part thereof which, upon inspection by Levenhuk, is found to be defective in materials or workmanship. As a condition to the obligation 
of Levenhuk  to repair or replace  such product, the product must be returned to Levenhuk  together with proof of purchase  satisfactory to 
Levenhuk.
This warranty does not cover consumable parts, such as bulbs (electrical, LED, halogen, energy-saving and other types of lamps), batteries 
(rechargeable and non-rechargeable), electrical consumables etc.
For further details, please visit our web site: https://www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Specifications

Optical design
Optics coating
Objective lens diameter (aperture), mm
Focal length, mm
Highest practical power, x
Focal ratio
Eyepiece barrel diameter
Mount type
Mount material
Mount height, mm
Barlow lens
Eyepieces
Finder

Newtonian reflector

fully multicoated

76

300
152

3

.

95

1

.

25"

Dobsonian, tabletop, 360° rotatable

wood

34
2x

H6

(50x)

, 

H20 (15x)

no

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

1. First, remove the dust cap from the tube front end.
2. Place the telescope onto a table or another level, sturdy surface. 
3. It's recommended to start observations with a low-magnification eyepiece (15х), and then change to a higher-magnification 
(

5

0x).

4. It's easy to point the telescope at an object. Loosen the control handle, turning it counterclockwise. Slowly, without 
jerking, move the tube and point it at the desired object. Move the tube up or down until you have reached the required 
level. Tighten the control handle clockwise.
5. The telescope produces an upside-down image. This is the optical scheme feature and makes no problem when observing 
celestial objects. 
6. To get a sharp image, slowly rotate the focusing knob located under the focuser.

Using the telescope

Levenhuk

International

Lifetime

Warranty