Diagonal mirror and eyepiece assembly:
Loosen the focuser thumbscrew. Insert the diagonal
mirror into the focuser tube and retighten the
thumbscrew to hold the diagonal mirror in place. Then
insert the desired eyepiece into the diagonal mirror
and secure it by retightening the thumbscrew.
Finderscope assembly:
unthread two screws in the back of the telescope tube.
Place the finderscope base above the holes on the tube.
Lock the finderscope base into position by tightening the
screws.
Models with fork mount
Remove the locking screw from the slow-motion control rod.
Insert the rod into the hole on the side of the fork mount.
Place the telescope tube between fork arms so that holes on the tube match the arm holes.
Fasten the telescope tube to the mount with thumbscrews.
Fasten the other end of the rod to the telescope tube by inserting the screw through shaft and
tube holes and tightening it.