Optical finderscope
Optical finderscopes are very useful accessories. When they are correctly aligned with the
telescope, objects can be quickly located and brought to the center of the view. Alignment is
best done outdoors in day light when it's easier to locate objects. If it is necessary to refocus
your finderscope, sight on an object that is at least 500 yards away.
For 5x24 and 6x24 finderscopes: turn the scope end to adjust the focus. For 6x30 finderscope
loosen the locking ring by unscrewing it back toward the bracket. The front lens holder can now
be turned in and out to focus. When focus is reached, lock it in position with the locking ring.
To align the finderscope, choose a distant object that is at least 500 yards away and point the
telescope at the object. Adjust the telescope so that the object is in the center of the view in
your eyepiece. Check the finderscope to see if the object is also centered on the crosshairs.
For 5x24 and 6x24 finderscopes: use three adjustment screws to center the finderscope
crosshairs on the object. For 6x30 finderscopes: adjust two windage screws only.
Red dot finder
The red dot finder is a zero magnification pointing tool that uses a coated glass window to
superimpose the image of a small red dot onto the night sky. The red dot finder is equipped with
a variable brightness control, azimuth and altitude adjustment screws. The finder is powered by
a 3-volt lithium battery located underneath at the front. To use the red dot finder, simply look
through the sight tube and move your telescope until the red dot overlaps the object. Make sure
to keep both eyes open when sighting.
Finderscope assembly
